More than panels in a field
A finished ground mount looks simple: rows of panels on a frame in the yard. Getting there takes careful planning, because the system has to stand up to Colorado wind, snow and hail for decades and send power safely to your home.
Here is what a ground mount project with Impact Energy & Roofing looks like, from the first visit to the day the system turns on.
Step 1: Consultation and site visit
We start by walking the property with you and looking at:
Sun and shade. Where the sun falls through the day and across seasons, and which trees or buildings cast shadows.
Slope and terrain. Flat or gently sloped ground is easiest, but most sites can work with the right racking.
Distance to the house. The trench run from the array to your electrical panel affects cost.
Setbacks and boundaries. Property lines, fences, driveways, septic fields and wells.
Your energy use. Recent electric bills tell us how big the system should be.
Future plans. An EV, a heat pump or a shop can raise electric use, so we can plan room to expand.
Step 2: System design
Next, we design the array: number of panels, layout, tilt, direction and equipment. A ground mount lets us choose the best direction and angle for production rather than working around a roof. You get a production estimate based on your actual site.
Step 3: Permits and approvals
Ground mounts usually need building and electrical permits from your city or county. Some areas, especially rural and unincorporated land, have zoning or setback rules for accessory structures. If you are in an HOA, we help you prepare what the board needs to review. We also submit the interconnection application to your utility.
Impact handles the paperwork, so you are not chasing permits on your own.
Step 4: Locating utilities
Before any digging, underground utility lines on the property are located and marked. That protects gas, water, power and communication lines and keeps the crew and your property safe.
Step 5: Foundations and racking
The frame needs solid footing. Depending on soil conditions and design, the foundation may use driven steel posts, screw style piles or concrete footings. Colorado soils range from sandy to rocky to expansive clay, so the right approach depends on the site.
The racking is then assembled on the foundations. It is engineered for local wind and snow loads, which matter a lot on the Front Range, where strong winter winds and heavy spring snow both show up.
Step 6: Panels and wiring
Panels are mounted to the racking and wired together, along with the inverter or panel level electronics. Grounding and bonding are completed so the system is safe.
Step 7: Trenching to the house
A trench is dug from the array to the home, and wiring runs through protective conduit at the depth code requires. The trench is backfilled and the ground restored as closely as possible.
Step 8: Ground cover
To keep weeds and grass from growing up into the panels, we lay ground cover under the array. Some owners add gravel on top for a cleaner look and easier upkeep.
Step 9: Inspection and turn on
After installation, the city or county inspects the work. Once it passes, your utility approves the connection and gives permission to operate. Then the system is turned on, and you can watch it produce in the monitoring app.
The physical installation for a typical residential ground mount usually takes a few days. Design, permits and utility approval take longer than the build itself, so plan ahead.
Keeping a ground mount in good shape
Ground mounts need very little attention, but a few habits help:
Manage vegetation. Keep grass and weeds trimmed around the array so they do not shade the bottom row.
Snow. Let the sun clear it, or gently brush it off with a soft roof rake. Never use metal tools, ice scrapers or hot water.
Animals. Watch for nests or burrows under the panels. Critter guards can help if it becomes a problem.
Monitoring. Check your app now and then. A sudden drop on a sunny day can point to an issue worth a service call.
After big storms. Walk out and look for debris, loose wiring or damage after hail or high wind.
Plan your ground mount
Impact Energy & Roofing designs and installs ground mount solar in Denver, Castle Rock, Colorado Springs and Pueblo, and handles the design, permits, installation and service in house. Call Impact Energy & Roofing at (888) 240 1131 to see if ground mount solar fits your property.